[ aws . apigateway ]

update-domain-name

Description

Changes information about the DomainName resource.

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  update-domain-name
--domain-name <value>
[--patch-operations <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--domain-name (string)

[Required] The name of the DomainName resource to be changed.

--patch-operations (list)

A list of update operations to be applied to the specified resource and in the order specified in this list.

(structure)

A single patch operation to apply to the specified resource. Please refer to http://tools.ietf.org/html/rfc6902#section-4 for an explanation of how each operation is used.

op -> (string)

An update operation to be performed with this PATCH request. The valid value can be add , remove , replace or copy . Not all valid operations are supported for a given resource. Support of the operations depends on specific operational contexts. Attempts to apply an unsupported operation on a resource will return an error message.

path -> (string)

The op operation’s target, as identified by a JSON Pointer value that references a location within the targeted resource. For example, if the target resource has an updateable property of {"name":"value"} , the path for this property is /name . If the name property value is a JSON object (e.g., {"name": {"child/name": "child-value"}} ), the path for the child/name property will be /name/child~1name . Any slash (“/”) character appearing in path names must be escaped with “~1”, as shown in the example above. Each op operation can have only one path associated with it.

value -> (string)

The new target value of the update operation. It is applicable for the add or replace operation. When using AWS CLI to update a property of a JSON value, enclose the JSON object with a pair of single quotes in a Linux shell, e.g., ‘{“a”: …}’. In a Windows shell, see Using JSON for Parameters .

from -> (string)

The copy update operation’s source as identified by a JSON-Pointer value referencing the location within the targeted resource to copy the value from. For example, to promote a canary deployment, you copy the canary deployment ID to the affiliated deployment ID by calling a PATCH request on a Stage resource with "op":"copy" , "from":"/canarySettings/deploymentId" and "path":"/deploymentId" .

Shorthand Syntax:

op=string,path=string,value=string,from=string ...

JSON Syntax:

[
  {
    "op": "add"|"remove"|"replace"|"move"|"copy"|"test",
    "path": "string",
    "value": "string",
    "from": "string"
  }
  ...
]

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples

To change the certificate name for a custom domain name

The following update-domain-name example changes the certificate name for a custom domain.

aws apigateway update-domain-name \
    --domain-name api.domain.tld \
    --patch-operations op='replace',path='/certificateArn',value='arn:aws:acm:us-west-2:111122223333:certificate/CERTEXAMPLE123EXAMPLE'

Output:

{
    "domainName": "api.domain.tld",
    "distributionDomainName": "d123456789012.cloudfront.net",
    "certificateArn": "arn:aws:acm:us-west-2:111122223333:certificate/CERTEXAMPLE123EXAMPLE",
    "certificateUploadDate": 1462565487
}

For more information, see Set up Custom Domain Name for an API in API Gateway in the Amazon API Gateway Developer Guide.

Output

domainName -> (string)

The custom domain name as an API host name, for example, my-api.example.com .

certificateName -> (string)

The name of the certificate that will be used by edge-optimized endpoint for this domain name.

certificateArn -> (string)

The reference to an AWS-managed certificate that will be used by edge-optimized endpoint for this domain name. AWS Certificate Manager is the only supported source.

certificateUploadDate -> (timestamp)

The timestamp when the certificate that was used by edge-optimized endpoint for this domain name was uploaded.

regionalDomainName -> (string)

The domain name associated with the regional endpoint for this custom domain name. You set up this association by adding a DNS record that points the custom domain name to this regional domain name. The regional domain name is returned by API Gateway when you create a regional endpoint.

regionalHostedZoneId -> (string)

The region-specific Amazon Route 53 Hosted Zone ID of the regional endpoint. For more information, see Set up a Regional Custom Domain Name and AWS Regions and Endpoints for API Gateway .

regionalCertificateName -> (string)

The name of the certificate that will be used for validating the regional domain name.

regionalCertificateArn -> (string)

The reference to an AWS-managed certificate that will be used for validating the regional domain name. AWS Certificate Manager is the only supported source.

distributionDomainName -> (string)

The domain name of the Amazon CloudFront distribution associated with this custom domain name for an edge-optimized endpoint. You set up this association when adding a DNS record pointing the custom domain name to this distribution name. For more information about CloudFront distributions, see the Amazon CloudFront documentation .

distributionHostedZoneId -> (string)

The region-agnostic Amazon Route 53 Hosted Zone ID of the edge-optimized endpoint. The valid value is Z2FDTNDATAQYW2 for all the regions. For more information, see Set up a Regional Custom Domain Name and AWS Regions and Endpoints for API Gateway .

endpointConfiguration -> (structure)

The endpoint configuration of this DomainName showing the endpoint types of the domain name.

types -> (list)

A list of endpoint types of an API ( RestApi ) or its custom domain name ( DomainName ). For an edge-optimized API and its custom domain name, the endpoint type is "EDGE" . For a regional API and its custom domain name, the endpoint type is REGIONAL . For a private API, the endpoint type is PRIVATE .

(string)

The endpoint type. The valid values are EDGE for edge-optimized API setup, most suitable for mobile applications; REGIONAL for regional API endpoint setup, most suitable for calling from AWS Region; and PRIVATE for private APIs.

vpcEndpointIds -> (list)

A list of VpcEndpointIds of an API ( RestApi ) against which to create Route53 ALIASes. It is only supported for PRIVATE endpoint type.

(string)

domainNameStatus -> (string)

The status of the DomainName migration. The valid values are AVAILABLE and UPDATING . If the status is UPDATING , the domain cannot be modified further until the existing operation is complete. If it is AVAILABLE , the domain can be updated.

domainNameStatusMessage -> (string)

An optional text message containing detailed information about status of the DomainName migration.

securityPolicy -> (string)

The Transport Layer Security (TLS) version + cipher suite for this DomainName . The valid values are TLS_1_0 and TLS_1_2 .

tags -> (map)

The collection of tags. Each tag element is associated with a given resource.

key -> (string)

value -> (string)

mutualTlsAuthentication -> (structure)

The mutual TLS authentication configuration for a custom domain name. If specified, API Gateway performs two-way authentication between the client and the server. Clients must present a trusted certificate to access your API.

truststoreUri -> (string)

An Amazon S3 URL that specifies the truststore for mutual TLS authentication, for example s3://bucket-name/key-name . The truststore can contain certificates from public or private certificate authorities. To update the truststore, upload a new version to S3, and then update your custom domain name to use the new version. To update the truststore, you must have permissions to access the S3 object.

truststoreVersion -> (string)

The version of the S3 object that contains your truststore. To specify a version, you must have versioning enabled for the S3 bucket.

truststoreWarnings -> (list)

A list of warnings that API Gateway returns while processing your truststore. Invalid certificates produce warnings. Mutual TLS is still enabled, but some clients might not be able to access your API. To resolve warnings, upload a new truststore to S3, and then update you domain name to use the new version.

(string)